8×10 Shed Movers in Minneapolis, MN

Moving a 8×10 shed in Minneapolis typically runs $450–$1,100. At 8 ft wide it stays inside Minnesota's legal width.

How much it costs to move a 8×10 shed in Minneapolis

These bands are the national 8×10 range adjusted for Minneapolis — a large urban market of roughly 425K people, where rates run 10% above the national baseline.

Shed Moving Cost Calculator — Minneapolis

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 8×10 shed in Minneapolis: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the MnDOT OS/OW Permits. A 8×10 at 8 ft wide clears the width limit without a permit.

Haulers here work around lakes-region routes and seasonal frost-law weight limits. Spring weight restrictions affect March–May moves.

Minneapolis is a large urban market (~425K residents) in Minnesota, so there's steady 8×10 hauler availability and competitive bidding on most jobs.

A 8×10 shed covers about 80 sq ft and is one of the small-class buildings our Minneapolis network handles most often. Standard small shed for tools and equipment. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Minneapolis are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 8-ft-wide building needs roughly 10 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Minnesota rules above: this size normally doesn't need one, which is part of why 8×10 moves stay at the lower end of the range.

What a 8×10 move in Minneapolis includes

• Site walk and access check at your Minneapolis pickup location
• Jacking and loading the 8×10 building onto a trailer with proper rigging
• Transport on Minnesota-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• Permit coordination if trailer height pushes you over the limit

8×10 shed moving in Minneapolis — common questions

How much does it cost to move a 8×10 shed in Minneapolis?

In Minneapolis a 8×10 shed (80 sq ft) typically costs $450–$1,100, with most homeowners landing near $775. Minneapolis is a large urban market of about 425K people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 8×10 shed in Minnesota?

Usually not. A 8×10 shed is 8 ft wide, inside Minnesota's 8'6" legal limit, so a standard trailer move needs no oversize permit. Height still matters — anything over 13'6" on the trailer triggers a permit from the MnDOT OS/OW Permits ($15–$300).

How long does a 8×10 shed move take in Minneapolis?

Most 8×10 moves inside the Minneapolis metro finish in a single day — commonly 2–4 hours door to door. Minnesota's lakes-region routes and seasonal frost-law weight limits can add time when the route needs a survey or the drop site needs prep.

Can a 8×10 shed be moved in one piece?

Yes. Haulers in the Minneapolis area move 8×10 buildings whole using a shed mule or tilt trailer. Standard small shed for tools and equipment. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 8×10 shed movers near me in Minneapolis?

Yes. Our hauler network covers Minneapolis and the surrounding Minnesota area, including St. Paul. Post your 8×10 move once and local haulers send free quotes.

Ready to move your 8×10 shed in Minneapolis?

Get quotes from local haulers in your area.