8×10 Shed Movers in Knoxville, TN

Moving a 8×10 shed in Knoxville typically runs $400–$1,000. At 8 ft wide it stays inside Tennessee's legal width.

How much it costs to move a 8×10 shed in Knoxville

These bands are the national 8×10 range adjusted for Knoxville — a mid-size city of roughly 198K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Knoxville

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 8×10 shed in Knoxville: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the TDOT Oversize Permits. A 8×10 at 8 ft wide clears the width limit without a permit.

Haulers here work around Appalachian foothills and Cumberland-plateau grades. Escort required above 12' wide; Nashville has rush-hour restrictions.

Knoxville is a mid-size city (~198K residents) in Tennessee, so there's steady 8×10 hauler availability and competitive bidding on most jobs.

A 8×10 shed covers about 80 sq ft and is one of the small-class buildings our Knoxville network handles most often. Standard small shed for tools and equipment. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Knoxville are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 8-ft-wide building needs roughly 10 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Tennessee rules above: this size normally doesn't need one, which is part of why 8×10 moves stay at the lower end of the range.

What a 8×10 move in Knoxville includes

• Site walk and access check at your Knoxville pickup location
• Jacking and loading the 8×10 building onto a trailer with proper rigging
• Transport on Tennessee-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• Permit coordination if trailer height pushes you over the limit

8×10 shed moving in Knoxville — common questions

How much does it cost to move a 8×10 shed in Knoxville?

In Knoxville a 8×10 shed (80 sq ft) typically costs $400–$1,000, with most homeowners landing near $700. Knoxville is a mid-size city of about 198K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 8×10 shed in Tennessee?

Usually not. A 8×10 shed is 8 ft wide, inside Tennessee's 8'6" legal limit, so a standard trailer move needs no oversize permit. Height still matters — anything over 13'6" on the trailer triggers a permit from the TDOT Oversize Permits ($15–$120).

How long does a 8×10 shed move take in Knoxville?

Most 8×10 moves inside the Knoxville metro finish in a single day — commonly 2–4 hours door to door. Tennessee's Appalachian foothills and Cumberland-plateau grades can add time when the route needs a survey or the drop site needs prep.

Can a 8×10 shed be moved in one piece?

Yes. Haulers in the Knoxville area move 8×10 buildings whole using a shed mule or tilt trailer. Standard small shed for tools and equipment. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 8×10 shed movers near me in Knoxville?

Yes. Our hauler network covers Knoxville and the surrounding Tennessee area, including Nashville, Memphis, Chattanooga. Post your 8×10 move once and local haulers send free quotes.

Ready to move your 8×10 shed in Knoxville?

Get quotes from local haulers in your area.