16×40 Shed Movers in Tempe, AZ

Moving a 16×40 shed in Tempe typically runs $1,900–$4,500. At 16 ft wide it's an oversize load under Arizona rules.

How much it costs to move a 16×40 shed in Tempe

These bands are the national 16×40 range adjusted for Tempe — a mid-size city of roughly 190K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Tempe

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 16×40 shed in Tempe: what's specific to here

Legal limits are 8'6" wide and 14' tall, enforced by the ADOT Enterprise Permits. A 16×40 at 16 ft wide needs an oversize permit ($15–$120).

Haulers here work around desert highways with washes and limited shoulder access. Front escort required for loads over 12' wide.

Tempe is a mid-size city (~190K residents) in Arizona, so there's steady 16×40 hauler availability and competitive bidding on most jobs.

A 16×40 shed covers about 640 sq ft and is one of the large-class buildings our Tempe network handles most often. Oversize building requiring permits and escorts. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Tempe are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 16-ft-wide building needs roughly 18 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Arizona rules above: this size does require one, and your hauler files it with the ADOT Enterprise Permits before the move.

What a 16×40 move in Tempe includes

• Site walk and access check at your Tempe pickup location
• Jacking and loading the 16×40 building onto a trailer with proper rigging
• Transport on Arizona-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• ADOT Enterprise Permits oversize permit and any required escort

16×40 shed moving in Tempe — common questions

How much does it cost to move a 16×40 shed in Tempe?

In Tempe a 16×40 shed (640 sq ft) typically costs $1,900–$4,500, with most homeowners landing near $3,200. Tempe is a mid-size city of about 190K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 16×40 shed in Arizona?

Yes. At 16 ft wide, a 16×40 building exceeds Arizona's 8'6" legal width, so your hauler pulls an oversize permit from the ADOT Enterprise Permits. Fees run $15–$120 per move. Front escort required for loads over 12' wide.

How long does a 16×40 shed move take in Tempe?

Most 16×40 moves inside the Tempe metro finish in a single day — commonly 5–8 hours door to door. Arizona's desert highways with washes and limited shoulder access can add time when the route needs a survey or the drop site needs prep.

Can a 16×40 shed be moved in one piece?

Yes. Haulers in the Tempe area move 16×40 buildings whole using a shed mule or tilt trailer. Oversize building requiring permits and escorts. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 16×40 shed movers near me in Tempe?

Yes. Our hauler network covers Tempe and the surrounding Arizona area, including Phoenix, Tucson, Mesa. Post your 16×40 move once and local haulers send free quotes.

Ready to move your 16×40 shed in Tempe?

Get quotes from local haulers in your area.