16×40 Shed Movers in Irving, TX

Moving a 16×40 shed in Irving typically runs $1,900–$4,500. At 16 ft wide it's an oversize load under Texas rules.

How much it costs to move a 16×40 shed in Irving

These bands are the national 16×40 range adjusted for Irving — a mid-size city of roughly 254K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Irving

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 16×40 shed in Irving: what's specific to here

Legal limits are 8'6" wide and 14' tall, enforced by the TxDMV Motor Carrier Division. A 16×40 at 16 ft wide needs an oversize permit ($60–$270).

Haulers here work around wide-ranging terrain from coastal flats to Hill-Country grades. Escort required above 14' wide; TxDOT often requires off-peak metro timing.

Irving is a mid-size city (~254K residents) in Texas, so there's steady 16×40 hauler availability and competitive bidding on most jobs.

A 16×40 shed covers about 640 sq ft and is one of the large-class buildings our Irving network handles most often. Oversize building requiring permits and escorts. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Irving are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 16-ft-wide building needs roughly 18 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Texas rules above: this size does require one, and your hauler files it with the TxDMV Motor Carrier Division before the move.

What a 16×40 move in Irving includes

• Site walk and access check at your Irving pickup location
• Jacking and loading the 16×40 building onto a trailer with proper rigging
• Transport on Texas-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• TxDMV Motor Carrier Division oversize permit and any required escort

16×40 shed moving in Irving — common questions

How much does it cost to move a 16×40 shed in Irving?

In Irving a 16×40 shed (640 sq ft) typically costs $1,900–$4,500, with most homeowners landing near $3,200. Irving is a mid-size city of about 254K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 16×40 shed in Texas?

Yes. At 16 ft wide, a 16×40 building exceeds Texas's 8'6" legal width, so your hauler pulls an oversize permit from the TxDMV Motor Carrier Division. Fees run $60–$270 per move. Escort required above 14' wide; TxDOT often requires off-peak metro timing.

How long does a 16×40 shed move take in Irving?

Most 16×40 moves inside the Irving metro finish in a single day — commonly 5–8 hours door to door. Texas's wide-ranging terrain from coastal flats to Hill-Country grades can add time when the route needs a survey or the drop site needs prep.

Can a 16×40 shed be moved in one piece?

Yes. Haulers in the Irving area move 16×40 buildings whole using a shed mule or tilt trailer. Oversize building requiring permits and escorts. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 16×40 shed movers near me in Irving?

Yes. Our hauler network covers Irving and the surrounding Texas area, including Houston, San Antonio, Dallas. Post your 16×40 move once and local haulers send free quotes.

Ready to move your 16×40 shed in Irving?

Get quotes from local haulers in your area.