16×40 Shed Movers in Colorado Springs, CO

Moving a 16×40 shed in Colorado Springs typically runs $2,100–$4,950. At 16 ft wide it's an oversize load under Colorado rules.

How much it costs to move a 16×40 shed in Colorado Springs

These bands are the national 16×40 range adjusted for Colorado Springs — a large urban market of roughly 489K people, where rates run 10% above the national baseline.

Shed Moving Cost Calculator — Colorado Springs

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 16×40 shed in Colorado Springs: what's specific to here

Legal limits are 8'6" wide and 14'6" tall, enforced by the CDOT Permits Office. A 16×40 at 16 ft wide needs an oversize permit ($15–$150).

Haulers here work around high-altitude passes and Front Range wind exposure. Mountain corridors often require escorts above 12' wide.

Colorado Springs is a large urban market (~489K residents) in Colorado, so there's steady 16×40 hauler availability and competitive bidding on most jobs.

A 16×40 shed covers about 640 sq ft and is one of the large-class buildings our Colorado Springs network handles most often. Oversize building requiring permits and escorts. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Colorado Springs are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 16-ft-wide building needs roughly 18 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Colorado rules above: this size does require one, and your hauler files it with the CDOT Permits Office before the move.

What a 16×40 move in Colorado Springs includes

• Site walk and access check at your Colorado Springs pickup location
• Jacking and loading the 16×40 building onto a trailer with proper rigging
• Transport on Colorado-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• CDOT Permits Office oversize permit and any required escort

16×40 shed moving in Colorado Springs — common questions

How much does it cost to move a 16×40 shed in Colorado Springs?

In Colorado Springs a 16×40 shed (640 sq ft) typically costs $2,100–$4,950, with most homeowners landing near $3,525. Colorado Springs is a large urban market of about 489K people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 16×40 shed in Colorado?

Yes. At 16 ft wide, a 16×40 building exceeds Colorado's 8'6" legal width, so your hauler pulls an oversize permit from the CDOT Permits Office. Fees run $15–$150 per move. Mountain corridors often require escorts above 12' wide.

How long does a 16×40 shed move take in Colorado Springs?

Most 16×40 moves inside the Colorado Springs metro finish in a single day — commonly 5–8 hours door to door. Colorado's high-altitude passes and Front Range wind exposure can add time when the route needs a survey or the drop site needs prep.

Can a 16×40 shed be moved in one piece?

Yes. Haulers in the Colorado Springs area move 16×40 buildings whole using a shed mule or tilt trailer. Oversize building requiring permits and escorts. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 16×40 shed movers near me in Colorado Springs?

Yes. Our hauler network covers Colorado Springs and the surrounding Colorado area, including Denver, Aurora. Post your 16×40 move once and local haulers send free quotes.

Ready to move your 16×40 shed in Colorado Springs?

Get quotes from local haulers in your area.