14×32 Shed Movers in Philadelphia, PA

Moving a 14×32 shed in Philadelphia typically runs $1,750–$4,500. At 14 ft wide it's an oversize load under Pennsylvania rules.

How much it costs to move a 14×32 shed in Philadelphia

These bands are the national 14×32 range adjusted for Philadelphia — a major metro of roughly 1.6M people, where rates run 25% above the national baseline.

Shed Moving Cost Calculator — Philadelphia

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 14×32 shed in Philadelphia: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the PennDOT Oversize Permits. A 14×32 at 14 ft wide needs an oversize permit ($30–$200).

Haulers here work around Appalachian grades and historic-borough street widths. Front escort above 12' wide; some turnpike sections need a route survey.

Philadelphia is a major metro (~1.6M residents) in Pennsylvania, so there's steady 14×32 hauler availability and competitive bidding on most jobs.

A 14×32 shed covers about 448 sq ft and is one of the large-class buildings our Philadelphia network handles most often. Large building, frequently used for RTO and resale. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Philadelphia are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 14-ft-wide building needs roughly 16 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Pennsylvania rules above: this size does require one, and your hauler files it with the PennDOT Oversize Permits before the move.

What a 14×32 move in Philadelphia includes

• Site walk and access check at your Philadelphia pickup location
• Jacking and loading the 14×32 building onto a trailer with proper rigging
• Transport on Pennsylvania-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• PennDOT Oversize Permits oversize permit and any required escort

14×32 shed moving in Philadelphia — common questions

How much does it cost to move a 14×32 shed in Philadelphia?

In Philadelphia a 14×32 shed (448 sq ft) typically costs $1,750–$4,500, with most homeowners landing near $3,125. Philadelphia is a major metro of about 1.6M people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 14×32 shed in Pennsylvania?

Yes. At 14 ft wide, a 14×32 building exceeds Pennsylvania's 8'6" legal width, so your hauler pulls an oversize permit from the PennDOT Oversize Permits. Fees run $30–$200 per move. Front escort above 12' wide; some turnpike sections need a route survey.

How long does a 14×32 shed move take in Philadelphia?

Most 14×32 moves inside the Philadelphia metro finish in a single day — commonly 5–8 hours door to door. Pennsylvania's Appalachian grades and historic-borough street widths can add time when the route needs a survey or the drop site needs prep.

Can a 14×32 shed be moved in one piece?

Yes. Haulers in the Philadelphia area move 14×32 buildings whole using a shed mule or tilt trailer. Large building, frequently used for RTO and resale. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 14×32 shed movers near me in Philadelphia?

Yes. Our hauler network covers Philadelphia and the surrounding Pennsylvania area, including Pittsburgh. Post your 14×32 move once and local haulers send free quotes.

Ready to move your 14×32 shed in Philadelphia?

Get quotes from local haulers in your area.