10×16 Shed Movers in Tacoma, WA

Moving a 10×16 shed in Tacoma typically runs $650–$1,700. At 10 ft wide it's an oversize load under Washington rules.

How much it costs to move a 10×16 shed in Tacoma

These bands are the national 10×16 range adjusted for Tacoma — a mid-size city of roughly 223K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Tacoma

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Tacoma: what's specific to here

Legal limits are 8'6" wide and 14' tall, enforced by the WSDOT Commercial Vehicle Services. A 10×16 at 10 ft wide needs an oversize permit ($15–$200).

Haulers here work around Cascade passes and dense Puget Sound suburban grids. Pilot car above 12' wide on most state routes.

Tacoma is a mid-size city (~223K residents) in Washington, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Tacoma network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Tacoma are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Washington rules above: this size does require one, and your hauler files it with the WSDOT Commercial Vehicle Services before the move.

What a 10×16 move in Tacoma includes

• Site walk and access check at your Tacoma pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Washington-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• WSDOT Commercial Vehicle Services oversize permit and any required escort

10×16 shed moving in Tacoma — common questions

How much does it cost to move a 10×16 shed in Tacoma?

In Tacoma a 10×16 shed (160 sq ft) typically costs $650–$1,700, with most homeowners landing near $1,175. Tacoma is a mid-size city of about 223K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 10×16 shed in Washington?

Yes. At 10 ft wide, a 10×16 building exceeds Washington's 8'6" legal width, so your hauler pulls an oversize permit from the WSDOT Commercial Vehicle Services. Fees run $15–$200 per move. Pilot car above 12' wide on most state routes.

How long does a 10×16 shed move take in Tacoma?

Most 10×16 moves inside the Tacoma metro finish in a single day — commonly 3–6 hours door to door. Washington's Cascade passes and dense Puget Sound suburban grids can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Tacoma area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Tacoma?

Yes. Our hauler network covers Tacoma and the surrounding Washington area, including Seattle, Spokane, Vancouver. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Tacoma?

Get quotes from local haulers in your area.