10×16 Shed Movers in Portland, OR

Moving a 10×16 shed in Portland typically runs $725–$1,875. At 10 ft wide it's an oversize load under Oregon rules.

How much it costs to move a 10×16 shed in Portland

These bands are the national 10×16 range adjusted for Portland — a large urban market of roughly 630K people, where rates run 10% above the national baseline.

Shed Moving Cost Calculator — Portland

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Portland: what's specific to here

Legal limits are 8'6" wide and 14' tall, enforced by the Oregon DOT Motor Carrier. A 10×16 at 10 ft wide needs an oversize permit ($13–$200).

Haulers here work around Cascade passes and dense Willamette Valley tree canopies. Pilot car required above 12' wide on most state routes.

Portland is a large urban market (~630K residents) in Oregon, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Portland network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Portland are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Oregon rules above: this size does require one, and your hauler files it with the Oregon DOT Motor Carrier before the move.

What a 10×16 move in Portland includes

• Site walk and access check at your Portland pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Oregon-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• Oregon DOT Motor Carrier oversize permit and any required escort

10×16 shed moving in Portland — common questions

How much does it cost to move a 10×16 shed in Portland?

In Portland a 10×16 shed (160 sq ft) typically costs $725–$1,875, with most homeowners landing near $1,300. Portland is a large urban market of about 630K people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 10×16 shed in Oregon?

Yes. At 10 ft wide, a 10×16 building exceeds Oregon's 8'6" legal width, so your hauler pulls an oversize permit from the Oregon DOT Motor Carrier. Fees run $13–$200 per move. Pilot car required above 12' wide on most state routes.

How long does a 10×16 shed move take in Portland?

Most 10×16 moves inside the Portland metro finish in a single day — commonly 3–6 hours door to door. Oregon's Cascade passes and dense Willamette Valley tree canopies can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Portland area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Portland?

Yes. Our hauler network covers Portland and the surrounding Oregon area, including Eugene, Salem. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Portland?

Get quotes from local haulers in your area.