10×16 Shed Movers in Phoenix, AZ

Moving a 10×16 shed in Phoenix typically runs $825–$2,125. At 10 ft wide it's an oversize load under Arizona rules.

How much it costs to move a 10×16 shed in Phoenix

These bands are the national 10×16 range adjusted for Phoenix — a major metro of roughly 1.7M people, where rates run 25% above the national baseline.

Shed Moving Cost Calculator — Phoenix

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Phoenix: what's specific to here

Legal limits are 8'6" wide and 14' tall, enforced by the ADOT Enterprise Permits. A 10×16 at 10 ft wide needs an oversize permit ($15–$120).

Haulers here work around desert highways with washes and limited shoulder access. Front escort required for loads over 12' wide.

Phoenix is a major metro (~1.7M residents) in Arizona, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Phoenix network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Phoenix are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Arizona rules above: this size does require one, and your hauler files it with the ADOT Enterprise Permits before the move.

What a 10×16 move in Phoenix includes

• Site walk and access check at your Phoenix pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Arizona-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• ADOT Enterprise Permits oversize permit and any required escort

10×16 shed moving in Phoenix — common questions

How much does it cost to move a 10×16 shed in Phoenix?

In Phoenix a 10×16 shed (160 sq ft) typically costs $825–$2,125, with most homeowners landing near $1,475. Phoenix is a major metro of about 1.7M people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 10×16 shed in Arizona?

Yes. At 10 ft wide, a 10×16 building exceeds Arizona's 8'6" legal width, so your hauler pulls an oversize permit from the ADOT Enterprise Permits. Fees run $15–$120 per move. Front escort required for loads over 12' wide.

How long does a 10×16 shed move take in Phoenix?

Most 10×16 moves inside the Phoenix metro finish in a single day — commonly 3–6 hours door to door. Arizona's desert highways with washes and limited shoulder access can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Phoenix area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Phoenix?

Yes. Our hauler network covers Phoenix and the surrounding Arizona area, including Tucson, Mesa, Chandler. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Phoenix?

Get quotes from local haulers in your area.