10×16 Shed Movers in Montgomery, AL

Moving a 10×16 shed in Montgomery typically runs $650–$1,700. At 10 ft wide it's an oversize load under Alabama rules.

How much it costs to move a 10×16 shed in Montgomery

These bands are the national 10×16 range adjusted for Montgomery — a mid-size city of roughly 195K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Montgomery

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Montgomery: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the Alabama DOT Permit Office. A 10×16 at 10 ft wide needs an oversize permit ($25–$100).

Haulers here work around rolling Piedmont terrain and pine-belt back roads. Loads over 12' wide typically need a front escort.

Montgomery is a mid-size city (~195K residents) in Alabama, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Montgomery network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Montgomery are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Alabama rules above: this size does require one, and your hauler files it with the Alabama DOT Permit Office before the move.

What a 10×16 move in Montgomery includes

• Site walk and access check at your Montgomery pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Alabama-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• Alabama DOT Permit Office oversize permit and any required escort

10×16 shed moving in Montgomery — common questions

How much does it cost to move a 10×16 shed in Montgomery?

In Montgomery a 10×16 shed (160 sq ft) typically costs $650–$1,700, with most homeowners landing near $1,175. Montgomery is a mid-size city of about 195K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 10×16 shed in Alabama?

Yes. At 10 ft wide, a 10×16 building exceeds Alabama's 8'6" legal width, so your hauler pulls an oversize permit from the Alabama DOT Permit Office. Fees run $25–$100 per move. Loads over 12' wide typically need a front escort.

How long does a 10×16 shed move take in Montgomery?

Most 10×16 moves inside the Montgomery metro finish in a single day — commonly 3–6 hours door to door. Alabama's rolling Piedmont terrain and pine-belt back roads can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Montgomery area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Montgomery?

Yes. Our hauler network covers Montgomery and the surrounding Alabama area, including Huntsville, Birmingham, Mobile. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Montgomery?

Get quotes from local haulers in your area.