10×16 Shed Movers in Denver, CO

Moving a 10×16 shed in Denver typically runs $725–$1,875. At 10 ft wide it's an oversize load under Colorado rules.

How much it costs to move a 10×16 shed in Denver

These bands are the national 10×16 range adjusted for Denver — a large urban market of roughly 717K people, where rates run 10% above the national baseline.

Shed Moving Cost Calculator — Denver

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Denver: what's specific to here

Legal limits are 8'6" wide and 14'6" tall, enforced by the CDOT Permits Office. A 10×16 at 10 ft wide needs an oversize permit ($15–$150).

Haulers here work around high-altitude passes and Front Range wind exposure. Mountain corridors often require escorts above 12' wide.

Denver is a large urban market (~717K residents) in Colorado, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Denver network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Denver are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Colorado rules above: this size does require one, and your hauler files it with the CDOT Permits Office before the move.

What a 10×16 move in Denver includes

• Site walk and access check at your Denver pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Colorado-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• CDOT Permits Office oversize permit and any required escort

10×16 shed moving in Denver — common questions

How much does it cost to move a 10×16 shed in Denver?

In Denver a 10×16 shed (160 sq ft) typically costs $725–$1,875, with most homeowners landing near $1,300. Denver is a large urban market of about 717K people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 10×16 shed in Colorado?

Yes. At 10 ft wide, a 10×16 building exceeds Colorado's 8'6" legal width, so your hauler pulls an oversize permit from the CDOT Permits Office. Fees run $15–$150 per move. Mountain corridors often require escorts above 12' wide.

How long does a 10×16 shed move take in Denver?

Most 10×16 moves inside the Denver metro finish in a single day — commonly 3–6 hours door to door. Colorado's high-altitude passes and Front Range wind exposure can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Denver area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Denver?

Yes. Our hauler network covers Denver and the surrounding Colorado area, including Colorado Springs, Aurora. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Denver?

Get quotes from local haulers in your area.