10×16 Shed Movers in Dallas, TX

Moving a 10×16 shed in Dallas typically runs $825–$2,125. At 10 ft wide it's an oversize load under Texas rules.

How much it costs to move a 10×16 shed in Dallas

These bands are the national 10×16 range adjusted for Dallas — a major metro of roughly 1.3M people, where rates run 25% above the national baseline.

Shed Moving Cost Calculator — Dallas

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Dallas: what's specific to here

Legal limits are 8'6" wide and 14' tall, enforced by the TxDMV Motor Carrier Division. A 10×16 at 10 ft wide needs an oversize permit ($60–$270).

Haulers here work around wide-ranging terrain from coastal flats to Hill-Country grades. Escort required above 14' wide; TxDOT often requires off-peak metro timing.

Dallas is a major metro (~1.3M residents) in Texas, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Dallas network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Dallas are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Texas rules above: this size does require one, and your hauler files it with the TxDMV Motor Carrier Division before the move.

What a 10×16 move in Dallas includes

• Site walk and access check at your Dallas pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Texas-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• TxDMV Motor Carrier Division oversize permit and any required escort

10×16 shed moving in Dallas — common questions

How much does it cost to move a 10×16 shed in Dallas?

In Dallas a 10×16 shed (160 sq ft) typically costs $825–$2,125, with most homeowners landing near $1,475. Dallas is a major metro of about 1.3M people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 10×16 shed in Texas?

Yes. At 10 ft wide, a 10×16 building exceeds Texas's 8'6" legal width, so your hauler pulls an oversize permit from the TxDMV Motor Carrier Division. Fees run $60–$270 per move. Escort required above 14' wide; TxDOT often requires off-peak metro timing.

How long does a 10×16 shed move take in Dallas?

Most 10×16 moves inside the Dallas metro finish in a single day — commonly 3–6 hours door to door. Texas's wide-ranging terrain from coastal flats to Hill-Country grades can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Dallas area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Dallas?

Yes. Our hauler network covers Dallas and the surrounding Texas area, including Houston, San Antonio, Austin. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Dallas?

Get quotes from local haulers in your area.