10×16 Shed Movers in Columbus, GA

Moving a 10×16 shed in Columbus typically runs $650–$1,700. At 10 ft wide it's an oversize load under Georgia rules.

How much it costs to move a 10×16 shed in Columbus

These bands are the national 10×16 range adjusted for Columbus — a mid-size city of roughly 202K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Columbus

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Columbus: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the GDOT Permit Office. A 10×16 at 10 ft wide needs an oversize permit ($30–$150).

Haulers here work around metro-Atlanta traffic windows and rural red-clay drives. Atlanta-area moves often require off-peak escorts.

Columbus is a mid-size city (~202K residents) in Georgia, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Columbus network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Columbus are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Georgia rules above: this size does require one, and your hauler files it with the GDOT Permit Office before the move.

What a 10×16 move in Columbus includes

• Site walk and access check at your Columbus pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Georgia-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• GDOT Permit Office oversize permit and any required escort

10×16 shed moving in Columbus — common questions

How much does it cost to move a 10×16 shed in Columbus?

In Columbus a 10×16 shed (160 sq ft) typically costs $650–$1,700, with most homeowners landing near $1,175. Columbus is a mid-size city of about 202K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 10×16 shed in Georgia?

Yes. At 10 ft wide, a 10×16 building exceeds Georgia's 8'6" legal width, so your hauler pulls an oversize permit from the GDOT Permit Office. Fees run $30–$150 per move. Atlanta-area moves often require off-peak escorts.

How long does a 10×16 shed move take in Columbus?

Most 10×16 moves inside the Columbus metro finish in a single day — commonly 3–6 hours door to door. Georgia's metro-Atlanta traffic windows and rural red-clay drives can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Columbus area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Columbus?

Yes. Our hauler network covers Columbus and the surrounding Georgia area, including Atlanta, Augusta. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Columbus?

Get quotes from local haulers in your area.