10×16 Shed Movers in Chicago, IL

Moving a 10×16 shed in Chicago typically runs $825–$2,125. At 10 ft wide it's an oversize load under Illinois rules.

How much it costs to move a 10×16 shed in Chicago

These bands are the national 10×16 range adjusted for Chicago — a major metro of roughly 2.7M people, where rates run 25% above the national baseline.

Shed Moving Cost Calculator — Chicago

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Chicago: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the IDOT Permits. A 10×16 at 10 ft wide needs an oversize permit ($25–$200).

Haulers here work around Chicago alley access and downstate flat farmland. Cook County moves often need municipal as well as state permits.

Chicago is a major metro (~2.7M residents) in Illinois, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Chicago network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Chicago are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Illinois rules above: this size does require one, and your hauler files it with the IDOT Permits before the move.

What a 10×16 move in Chicago includes

• Site walk and access check at your Chicago pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on Illinois-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• IDOT Permits oversize permit and any required escort

10×16 shed moving in Chicago — common questions

How much does it cost to move a 10×16 shed in Chicago?

In Chicago a 10×16 shed (160 sq ft) typically costs $825–$2,125, with most homeowners landing near $1,475. Chicago is a major metro of about 2.7M people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 10×16 shed in Illinois?

Yes. At 10 ft wide, a 10×16 building exceeds Illinois's 8'6" legal width, so your hauler pulls an oversize permit from the IDOT Permits. Fees run $25–$200 per move. Cook County moves often need municipal as well as state permits.

How long does a 10×16 shed move take in Chicago?

Most 10×16 moves inside the Chicago metro finish in a single day — commonly 3–6 hours door to door. Illinois's Chicago alley access and downstate flat farmland can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Chicago area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Chicago?

Yes. Our hauler network covers Chicago and the surrounding Illinois area, including Aurora. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Chicago?

Get quotes from local haulers in your area.