10×16 Shed Movers in Cary, NC

Moving a 10×16 shed in Cary typically runs $650–$1,700. At 10 ft wide it's an oversize load under North Carolina rules.

How much it costs to move a 10×16 shed in Cary

These bands are the national 10×16 range adjusted for Cary — a mid-size city of roughly 180K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Cary

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×16 shed in Cary: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the NCDOT Oversize Permits. A 10×16 at 10 ft wide needs an oversize permit ($12–$100).

Haulers here work around Piedmont rolling terrain and frequent rural-bridge crossings. Front escort above 12' wide.

Cary is a mid-size city (~180K residents) in North Carolina, so there's steady 10×16 hauler availability and competitive bidding on most jobs.

A 10×16 shed covers about 160 sq ft and is one of the medium-class buildings our Cary network handles most often. Large enough for mowers, bikes, and tools. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Cary are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on North Carolina rules above: this size does require one, and your hauler files it with the NCDOT Oversize Permits before the move.

What a 10×16 move in Cary includes

• Site walk and access check at your Cary pickup location
• Jacking and loading the 10×16 building onto a trailer with proper rigging
• Transport on North Carolina-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• NCDOT Oversize Permits oversize permit and any required escort

10×16 shed moving in Cary — common questions

How much does it cost to move a 10×16 shed in Cary?

In Cary a 10×16 shed (160 sq ft) typically costs $650–$1,700, with most homeowners landing near $1,175. Cary is a mid-size city of about 180K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 10×16 shed in North Carolina?

Yes. At 10 ft wide, a 10×16 building exceeds North Carolina's 8'6" legal width, so your hauler pulls an oversize permit from the NCDOT Oversize Permits. Fees run $12–$100 per move. Front escort above 12' wide.

How long does a 10×16 shed move take in Cary?

Most 10×16 moves inside the Cary metro finish in a single day — commonly 3–6 hours door to door. North Carolina's Piedmont rolling terrain and frequent rural-bridge crossings can add time when the route needs a survey or the drop site needs prep.

Can a 10×16 shed be moved in one piece?

Yes. Haulers in the Cary area move 10×16 buildings whole using a shed mule or tilt trailer. Large enough for mowers, bikes, and tools. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×16 shed movers near me in Cary?

Yes. Our hauler network covers Cary and the surrounding North Carolina area, including Charlotte, Raleigh, Greensboro. Post your 10×16 move once and local haulers send free quotes.

Ready to move your 10×16 shed in Cary?

Get quotes from local haulers in your area.