10×10 Shed Movers in Richmond, VA

Moving a 10×10 shed in Richmond typically runs $500–$1,200. At 10 ft wide it's an oversize load under Virginia rules.

How much it costs to move a 10×10 shed in Richmond

These bands are the national 10×10 range adjusted for Richmond — a mid-size city of roughly 229K people, where rates run 0% at the national baseline.

Shed Moving Cost Calculator — Richmond

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×10 shed in Richmond: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the Virginia DMV Hauling Permits. A 10×10 at 10 ft wide needs an oversize permit ($20–$100).

Haulers here work around Blue Ridge grades and dense NOVA suburban routing. Front escort above 12' wide; NOVA needs off-peak timing.

Richmond is a mid-size city (~229K residents) in Virginia, so there's steady 10×10 hauler availability and competitive bidding on most jobs.

A 10×10 shed covers about 100 sq ft and is one of the medium-class buildings our Richmond network handles most often. Mid-size square shed, ideal for backyard storage. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Richmond are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Virginia rules above: this size does require one, and your hauler files it with the Virginia DMV Hauling Permits before the move.

What a 10×10 move in Richmond includes

• Site walk and access check at your Richmond pickup location
• Jacking and loading the 10×10 building onto a trailer with proper rigging
• Transport on Virginia-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• Virginia DMV Hauling Permits oversize permit and any required escort

10×10 shed moving in Richmond — common questions

How much does it cost to move a 10×10 shed in Richmond?

In Richmond a 10×10 shed (100 sq ft) typically costs $500–$1,200, with most homeowners landing near $850. Richmond is a mid-size city of about 229K people, which puts local labor and trailer rates in line with the national average for this size.

Do I need a permit to move a 10×10 shed in Virginia?

Yes. At 10 ft wide, a 10×10 building exceeds Virginia's 8'6" legal width, so your hauler pulls an oversize permit from the Virginia DMV Hauling Permits. Fees run $20–$100 per move. Front escort above 12' wide; NOVA needs off-peak timing.

How long does a 10×10 shed move take in Richmond?

Most 10×10 moves inside the Richmond metro finish in a single day — commonly 3–6 hours door to door. Virginia's Blue Ridge grades and dense NOVA suburban routing can add time when the route needs a survey or the drop site needs prep.

Can a 10×10 shed be moved in one piece?

Yes. Haulers in the Richmond area move 10×10 buildings whole using a shed mule or tilt trailer. Mid-size square shed, ideal for backyard storage. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×10 shed movers near me in Richmond?

Yes. Our hauler network covers Richmond and the surrounding Virginia area, including Virginia Beach, Chesapeake, Norfolk. Post your 10×10 move once and local haulers send free quotes.

Ready to move your 10×10 shed in Richmond?

Get quotes from local haulers in your area.