10×10 Shed Movers in Jacksonville, FL

Moving a 10×10 shed in Jacksonville typically runs $550–$1,325. At 10 ft wide it's an oversize load under Florida rules.

How much it costs to move a 10×10 shed in Jacksonville

These bands are the national 10×10 range adjusted for Jacksonville — a large urban market of roughly 986K people, where rates run 10% above the national baseline.

Shed Moving Cost Calculator — Jacksonville

Ballpark only. Real quotes depend on the hauler, permits, and your exact sites — most homeowners get competing quotes within 24–48 hours.

Moving a 10×10 shed in Jacksonville: what's specific to here

Legal limits are 8'6" wide and 13'6" tall, enforced by the FDOT Permits Office. A 10×10 at 10 ft wide needs an oversize permit ($28–$150).

Haulers here work around flat terrain but heavy hurricane-shutter and tree-canopy obstacles. Loads over 12' wide need a front escort; 14'+ need a rear escort.

Jacksonville is a large urban market (~986K residents) in Florida, so there's steady 10×10 hauler availability and competitive bidding on most jobs.

A 10×10 shed covers about 100 sq ft and is one of the medium-class buildings our Jacksonville network handles most often. Mid-size square shed, ideal for backyard storage. On a tilt trailer or shed mule, the whole building moves in one piece — no disassembly — provided there's a clear path at both the pickup and the drop site.

The three cost drivers in Jacksonville are access, distance, and permits. Access means gate width, fence lines, slope, and overhead utility drops — a 10-ft-wide building needs roughly 12 ft of clear opening to get through comfortably. Distance is straightforward mileage from pickup to drop. Permits depend on Florida rules above: this size does require one, and your hauler files it with the FDOT Permits Office before the move.

What a 10×10 move in Jacksonville includes

• Site walk and access check at your Jacksonville pickup location
• Jacking and loading the 10×10 building onto a trailer with proper rigging
• Transport on Florida-legal routes, avoiding restricted roads
• Placement and leveling at the drop-off site
• FDOT Permits Office oversize permit and any required escort

10×10 shed moving in Jacksonville — common questions

How much does it cost to move a 10×10 shed in Jacksonville?

In Jacksonville a 10×10 shed (100 sq ft) typically costs $550–$1,325, with most homeowners landing near $950. Jacksonville is a large urban market of about 986K people, which puts local labor and trailer rates above the national average for this size.

Do I need a permit to move a 10×10 shed in Florida?

Yes. At 10 ft wide, a 10×10 building exceeds Florida's 8'6" legal width, so your hauler pulls an oversize permit from the FDOT Permits Office. Fees run $28–$150 per move. Loads over 12' wide need a front escort; 14'+ need a rear escort.

How long does a 10×10 shed move take in Jacksonville?

Most 10×10 moves inside the Jacksonville metro finish in a single day — commonly 3–6 hours door to door. Florida's flat terrain but heavy hurricane-shutter and tree-canopy obstacles can add time when the route needs a survey or the drop site needs prep.

Can a 10×10 shed be moved in one piece?

Yes. Haulers in the Jacksonville area move 10×10 buildings whole using a shed mule or tilt trailer. Mid-size square shed, ideal for backyard storage. The limiting factor is almost never the building — it's gate width, overhead lines, and turning room at both ends.

Are there 10×10 shed movers near me in Jacksonville?

Yes. Our hauler network covers Jacksonville and the surrounding Florida area, including Miami, Tampa, Orlando. Post your 10×10 move once and local haulers send free quotes.

Ready to move your 10×10 shed in Jacksonville?

Get quotes from local haulers in your area.